Got hold of one and for quick raise antenna masts, not fiber glass design is ideal. Wth HOA gestapo hunting Hams an antenna that can be raised and dropped perfecto. Ok you need to give us some more choices like 1.25 to 1.0 and 1.0 to .75

I am trying to make an awning for my camper. This involves 2 adjustable length horizontals from the roof and 2 verticals with a 3/4" conduit at the front running horizontally.
A simple design.
I used 3/4 with a 1/2 insert with these clamps to allow adjustability in both distance from the camper and height.
Sounds straightforward right? WRONG.
You cannot tighten the clamp onto the 3/4 to stop it being able to be pulled off the end. You also cannot pin it with a screw because if you do the slide action is lost. Short of a tube of super glue it is impossible to get these to stay put. Plus they are highly overpriced. It is a bit of molded plastic. Worth about $5 tops instead of the outrageous $10.

I was looking for a way to connect a cable or rope to the end of a pipe and with the threaded insert you solved my problem...Thanks
I'm looking to do a cantilever shade shade structure over my car. I needed a way to attach a cable or rope to the end of the over hang then up to the opposite pipe at the high point of a vertical pipe then run the cable down to the ground where it would be connected to 9" Screw Spiral Tent Peg Stakes into the ground. This creates a triangle connection for the apex of the build to the ground to support the cantilever. I'm using 3/4" pipe with all the connectors needed to make this build. I'll be able to build this using only four 10' lengths of pipe cut to size. I already have the have the cover from another project so the total cost including your connectors, will be under $50.00. Now the work begins....

This is for my very simple first build which is just a stand alone telescoping pole to hold some plastic sheeting up for some household projects. This device is perfect for my design and very well manufactured. I ordered a few extra for future projects.