Your Cart is Empty
$9.49
The Adjustable Angle Connector is one of the most versatile structural pipe fittings in the Maker Pipe building system. You can choose from two available sizes that are designed to natively fit either 3/4" or 1" EMT Conduit respectively. EMT Conduit is readily available at your local hardware store. The 1/2" connector variant includes the needed adapter shims for building with 1/2" EMT Conduit.The Adjustable Angle Connector gives you the ability to achieve any angle up to 90 degrees in either direction. Use the provided hardware to secure two pipes at a desired angle or partially tighten the top bolt and nut to create a hinge.
*Hardware is included with each Adjustable Angle Hinge Connector
The Adjustable Angle Connector consists of four pieces. The two long pieces secure a terminating pipe and create the end clamp. The two smaller pieces have interlocking puzzle pieces that secure a through pipe and create the puzzle piece clamp. You can buy all four pieces together or buy the bottom/top half separately if you need one and not the other.
I needed a slope between two points for a structure, and instead of doing math to figure out the fixed angle, I bought these. Easy to install, practical to use.
Hi Folks, Your product line was critical to creating a cost-effective approach to the design challenge of creating a "catio" from an existing balcony with wood rails and a sill. Using the upright and angle hardware, clamps to secure a cross brace, we created a very secure and sturdy place for our cats to hang out. We used 30% shade cloth with grommets every 2' and gathered it to neaten up the appearance. My better half is not thrilled about the 100% neat finish, but we can work on that. Thought about cutting 4" PVC or drain tile pipe in half and use lengths to cover the slack.
I am SOOOO done trying to order parts from MakerPipe. They are constantly out of stock on critical items and give NO notifications when they might become available. I tried calling makerpipe and they just don't pick up. I have now found other avenues to order similar parts, through Amazon. Ofc, I am paying more money for these parts but at least I don't have to deal with the frustration of trying to order though makerpipe. Just sad!
Hi there, I apologize that we missed your calls. I know that can be frustrating. During the summer, we receive a higher call volume and do our best to answer everyone. We may miss you if we're on the line with another customer or if we've stepped into the shop momentarily. In the future, please leave a voicemail so we can get back with you as soon as possible. We responded to your website inquiry on the 24th. It may be in your spam folder if you don't see it in your inbox. I am sorry for the frustration you've experienced.
I had to build a device called an Alter Shield, in order to test a device that I made, against. I knew it would require special bracing but, I had know idea where to get it. I found Maker Pipe's website, and they make exactly what I needed but, they were sold out. I called their office to see when they would have more in stock, and David the Owner answered. Since I only needed a a few parts, he said "let me see if I have any parts back there", and he managed to dig up the pieces that I needed! he shipped them that day and I got them two days later. There Were four other pieces that I realized I needed so, I called back and they got those sent out right away too! All this to say, Maker Pipe went the extra mile when I needed some uncommon parts ASAP. Thank you David!
