Your Cart is Empty
$3.74
The T Connector is our most popular and versatile structural pipe fitting. It is designed to natively fit electrical conduit which is readily available at your local hardware store. The 3/4" and 1" variants will clamp securely to their respective size.The 1/2" connector variant includes two adapter shims for building with 1/2" EMT Conduit. The T fitting allows you to easily connect two pipes at a 90 degree angle or use it as an elbow on the ends of conduit. You only need a single 5mm hex wrench for the T Connector assembly.
*Hardware is included with each T connector
The T connector consists of two mirrored pieces that interlock together with a puzzle piece design. The two pieces clamp together with one nut and bolt. The clamp design allows you to quickly change a connection while building or remove and reuse the connectors in a future project.The pocket feature locks the nut into place when tightening, this makes for an easy one tool assembly no matter which side the nut is on.
We decided to build an EMT trellis for the grapes in out backyard. We looked into Maker Pipe's connector and other types carefully. On a perfectly level surface, other types of connector might have been the easiest option. but our backyard slopes from southeast to northwest with about a 5.5-inch difference, we believed that Maker Pipe's connector would give us the most flexibility. So we went with Maker Pipe. After purchasing all the materials, we realized that we made a big mistake during the designing (as we are more familiar with meters in the metric system than with feet). We had to change our design significantly. It's amazing Maker Pipe connectors fit our new design - we did not have to go back to purchase more connectors!!! Once the project was done, the trellis is sturdy and beautiful — a solid proof that we made the right choice.
Finding Maker Pipe has made my project possible and easy. The only issues were on my end when I purchased what I thought was 3/4 inch pipe that turned out to be 3/4 id instead of o.d. However the 1 inch o.d actually worked out better and Maker Pipe was quick to exchange all parts I had ordered. Maker Pipe has also added pre drilled holes for set screws which is a big plus. I’m sure I will be finding many other uses for Maker Pipe products
Wanted to split the door on the chicken coop so we can toss in treats or hand things in and out without the hens escaping. The door tubing was the same dimension as emt, so took 4 t connectors addeded the two cross pieces, took a reciprocating saw and cut out the section between the upper and lower door and was done .Very easy economical solution. Added a couple of plugs and a latch to finish it off.
After purchasing a chicken run online, I wanted to reduce the span between the vertical pipes. After an internet search, I came across Maker Pipe, which had all the connectors I needed. The items were shipped fast, and I was very pleased with the products. The owner, Mr. David Schlitter, even reached out to make sure everything was okay. Very pleased with my experience with this company. Thank you.
