Your Cart is Empty
$5.95
The 90 degree structural pipe fitting makes a strong corner connection allowing you to add two pipes at a 90 degree angle and one essential pipe vertically. It is designed to natively fit EMT Conduit which is readily available at your local hardware store. The 1/2" connector variant includes 3/4" connectors and three adapter shims for building with 1/2" EMT Conduit. This 90 degree steel pipe connector is a great solution for DIY pipe shelves, desks, and anything that requires a cube structure.
*Hardware is included with each 90 degree connector
The 90 degree angled pipe fitting includes an inside and outside piece that clamp together with two nuts and bolts. The clamp design allows you to quickly change a connection while building or remove and reuse the connectors in a future project.Both pieces are designed with a pocket feature that locks the nut into place when tightening, this allows for a one tool assembly no matter which piece the nuts are on. Order some 90 degree conduit connectors and add strong corner connections to your DIY pipe build!
I needed a garden shade; however, after searching online was not able to find anything for the specifications I needed. I was at Home Depot and came upon conduit pipes and thought that these would be great, but I can't weld or drill holes. I am not a very good handywoman. I went online to search for other methods of putting these pipes together for the project I had planned. After an extensive and long search, somehow I came upon Maker Pipe site! This was fantastic. I put together a shade canopy, but I have to admit it took a learning curve. I finally got it together. I used rebar pounded it into the ground, and placed the pipes over it, and pounded the pipes few inches into the ground to keep it in place from high winds and potential hurricanes, and it worked. I did another project, but I bought the wrong connector pipe instead of the T connector. I got the rail connector. Very sad and expensive mistake, I won't be able to use them.
I have to say that it is pricey, but I did get my project completed and what I needed for my area. I will continue to order from Maker Pipe as my ideas for my garden grows no pun intended.
We built our second consecutive exhibit with Maker Pipe products. Quality, ease of use, customer support, immediate shipping, fantastic products!
I love these products, the price and what is possible with them! I was missing some hardware and end caps, but customer service response was super fast and apologetic. I received the missing pieces very quickly, which is why it didn't effect my star rating at all. Small mistakes happen, but to me...responding like that is a truer measure than even receiving it perfect the first time. Looking forward to many future orders!
I bought 2 of these to make the 2 corners on an awning I am trying to make. Bear in mind that you cannot fit the vertical pipe unless the 2 screws are loose. This results in a gigantic juggling act as you try and hold the job in place and the 3 pipes. All at the same time as trying to tighten up the screws. My situation was made even worse by using 1/2 pipe with the plastic clip on adapters. Once together it is flimsy and easily just pulls apart. My expensive order is starting to look like a a waste of money. I could have done better at Home Depot and breaking out a driil. I am beginning to feel that all this stuff is very overpriced and I got sucked in by some YT videos and a slick website. Not happy.
