"Found a great use for this! working on a mobile detailing company and was concerned about added weight for a shelf in the van. came across these baby's! worked amazingly. super easy and affordable." - Brennen
"I found on trash day key parts for a riding tractor mowing collection system. I found 2 collect buckets, the cover for the buckets and the connecting tubes that attach to the discharge of the mowing deck. What I did not have was the supporting metal structure that holds the buckets up on the back of the riding mower.
I then designed and installed a wooden platform to the back of the riding tractor. Next I designed and built from conduit and your Maker Pipe Connectors a support structure to support the collection buckets. I also added a vertical support to add stability and prevent the weight of full buckets from pulling the structure downward. Your connectors made the project go 1-2-3. Thank you for a product that is so versatile for do it yourselfers like me."
"I discovered these connectors a few weeks ago and they gave me a great idea. I built a kayak rack for my Tacoma. I usually just throw them in the bed and off we go, but trying to travel or camp leaves us short on room. I built this so we could carry all of our other gear below. Went on weekend trip to mountains this past weekend, everything worked great!" - Todd
"Problem- How to mount a bird feeder outside the kitchen window, 15' off of the ground? I made a boom that mounts to the deck railing. It pivots so that you can swing it over the deck to fill the feeder. The base has a notch in it to keep it from swinging in the wind. You lift it up out of the notch so you can pivot it. Not much of a project, but a handy solution to the problem." - John